Is It Safe to Drink Borewell Water?

The water supply from lakes and rivers is insufficient to meet the water supply needs of a country like India. Hence, a large chunk of the population depends on borewell water to meet all the water requirements. Using this water for washing or cleaning purposes is fine, but when it comes to drinking, is it … Continue reading “Is It Safe to Drink Borewell Water?”

The water supply from lakes and rivers is insufficient to meet the water supply needs of a country like India. Hence, a large chunk of the population depends on borewell water to meet all the water requirements. Using this water for washing or cleaning purposes is fine, but when it comes to drinking, is it safe? If you do not think so, it is time to choose the best RO system for home to keep your family healthy and safe. But, before that, we need to understand what makes borewell water unsafe.

The Composition

Borewell water is usually hard due to the presence of dissolved calcium and magnesium. It tastes a bit salty but generally is not harmful for your health. The hardness of water is measured with TDS matter. If the water has TDS of more than 200mg/L, you are using hard water.

There are chances that the water could be contaminated with microorganisms such as bacteria and viruses. It could also contain heavy metals like lead, fluoride and arsenic.

Arsenic in Borewell Water

As mentioned above, borewell water has a high risk of Arsenic contamination. This type of contamination could be the result of natural as well as human activities. On the human front, Arsenic is a widely used industrial product and seeps into water through the industrial waste, which gets dumped into various sources of water. It is very harmful and can cause various health problems ranging from diarrhoea to brain disorders. Extended exposure could even lead to cancer, heart disorders and skin ailments.

Testing the Water  

The impurities in the borewell water cannot be assessed by just physically looking, smelling or even tasting it. To know the level of hardness and the impurities present, it has to be tested in a lab. Depending on the results, you can decide whether you wish to consume the water as is or you need to purify it before consumption.

Purifying the Water

Hard water without any impurities is safe to drink. However, it just might be unpalatable. You can make use of an RO system to help improve the taste of the water.

If no heavy metals are found in the tested sample, it is safe to go ahead with a gravity-based purifier. These are fitted with sediment filters and activated carbon, which are capable of removing the physical impurities and microorganisms from the water.

If the test reveals the presence of heavy metals, the only way for purification is going with the best RO system for home. These purifiers are also fitted with sediment filters and activated carbon. If there’s a higher presence of microorganisms, you will need to go with RO+UV+UF water purifier. This will ensure complete removal of impurities.

The drinking water should be fit for consumption. If not, the balance of the body can get disturbed and lead to all kinds of problems. Reverse Osmosis, as a purification method, is simple and assures the safety of water.